Come join us as we take a quick tour of
HHR Lasers, Inc.,
home of gas laser system refurbishing at its finest. The following photos and overview will orient you to the many
services performed here at HHR, such as re-gassing and alignment of white light systems used in
laser light shows.
If your gas laser and/or power supply (psu) are giving you problems then you have come to the right place. We can offer some general
and provide quality repair and re-tubing at reasonable rates.
Ever wonder what goes into a laser tube and why it seems most manufacturers make this appear to be so much black magic? At HHR we do have our proprietary processes, but we can still take the mysticism out of refurbishing and strictly adhere to time-honored and tested techniques.
Your laser plasma tube is treated with the utmost care from the moment it arrives at our facility, through the refurbishment process, and back to you. But it doesn't end there. We guarantee our work with a variety of coverages and, in addition, we can provide extended warranties.
When your laser arrives it is unpacked and thoroughly inspected. Failure modes are checked and logged. A full quote is prepared, after which we will contact you to discuss your options.
If your laser is suffering from an over-pressure headache or has the under-pressure blues, then we can cure your plasma tube ills with a minimum of invasive reconstruction and at a very affordable price. In fact if the laser head arrives still vacuum intact, the internals will never see air during re-pumping and re-processing.
If the laser tube is broken, then repairs are done using portable clean-room glove boxes and all parts are stored in high pressure argon gas.
We at HHR will never shorten your tube's lifetime by cutting corners or using inferior materials in the rebuild process. All tubes undergo a minimum 48 hours of bake-out at 350°C to eradicate all impurities. They are then back-filled via a specially designed process with ultra-pure gases. All welds are done in inert argon gas boxes and scanned by high precision leak detectors to verify ultra-high vacuum integrity.
Standard fused silica or crystal quartz windows are precision hard-sealed to the Brewster stubs. We grind and polish all our own stubs to ensure quality and accuracy. We use the finest hot cathodes manufactured and always meet or exceed OEM requirements.
What's more, we rewind DC plasma pinch solenoids for many ion lasers at a substantial cost savings. And of course, we service and repair all makes of laser psu's with the same care and attention to detail we use for tube re-processing.
And finally, another capability: not only do we
manufacture gas lasers, we can manufacture them. With 30 years' certified experience in glassblowing (membership, American Scientific Glassblowers Society), HHR does build factory-new laser tubes. Equipped with on-site, full service fabrication stations complete with glass lathes, we produce both conventional and nonstandard glassware such as helium-mercury laser tubes.
Lasers for Sale
Top of Page